Nanosolar Lot of 1000 NanoCells 2.6KW Lightweight Flexible CIGS MWT Solar Cells

Description

Nanosolar Lot of 1000 NanoCells 2.6KW Lightweight Flexible CIGS MWT Solar Cells
Nanosolar NanoCell 2,600 Watt Lot of 1,000 2.6 Watt Lightweight Flexible Aluminum CIGS MWT Solar Cells
This is for a full 1,000 cell carrier. This is for a lot of 1000 solar cells that total 2,600 watts. These are rated at about 0.45 volts at 5.8 amps and are a flexible cell made on a semi rigid but flexible aluminum base.
We have found 3M double sided conductive tape is the best way to connect these cells for the do it yourself method. We are also experimenting with battery tab spot welders. Nanosolar used Ultrasonic welders to assemble these into panels.
Manufacturer Specifications:
Raw Solar Cell Uncoated
Rated Power: 2.6 Watts
Vmpp (V) 0.45
Impp (A) 5.8
Voc (V) 0.61
Isc (A) 6.7
Operating Module Temperature -40 to +85C
Length: 165mm (6.5 inches)
Width: 135mm (5.3 inches)
Height: 0.4mm (0.02 inches)
Weight: 18.5g
Raw Solar Cell Uncoated
Lightweight Aluminum Structure CIGS Solar Cells which are Semi-Flexible
MWT Metal Wrap-Through Solar Cell Technology
Product manuals, data sheets, specifications, etc.... are available in the DOWNLOADS tab above.  Contact us if you have any questions.
These raw flexible solar cells are extremely rare and have never been offered for sale to the public before. These came from the last experimental production runs at the Nanosolar Facility in California. The facility and company was liquidated during September and October of 2013. We can ship these in bin racks of 1,000 cells and cartons of 6,000 cells if you would like larger quantities.
These raw solar cells are very robust for CIGS, however, will degrade if not encapsulated in weather tight enclosure. Its interesting for experiment we have left a few exposed and un-encapsulated for 2 years and have found minimal degradation.
The CIGS solar cells are made of aluminum and to connect them we have used double sided conductive acrylic adhesive tape made by 3M / Tape Case (1182). Nanosolar used ultrasonic metal spot welders to connect the cells in production We have found a spot welder does connect them but if the settings are not just right you will blow a hole through them or the connection is weak. We believe a combination of the 3M 1182 tape and spot weld may be the best choice for DIY applications.
We have had many questions regarding cutting these cells. When these cells are cut they retain their .45 volts but the amps are reduced somewhat proportionally. You cannot use regular scissors or tin snips as these are made of 2 thin sheets of aluminum separated by energy producing compounds. If the top (negative) and bottom (positive) aluminum sheets touch it shorts the cell. We have successfully cut these cells with a water-jet cutter as well as a sharp bench shear set at 45 degree angle. It is possible to cut and then sand the cut edges back until the two sheets are separated but that is a tedious task and not recommended. Also we have noticed the cut cells are not as robust as the uncut cells even when accounting for the size differences of the cells.
The large area of metal (nickel coated aluminum) back is the positive output of the cell. The thin strip of un-coated aluminum on the down-facing side of the front is the negative output of the cell. Let me know if you have any questions about these cells. These came from the manufacturing floor of Nanosolar in San Jose and are being stored in air tight bags with desiccant. Each cell was tested for proper output by Nanosolar before being packaged and we have found these are very robust cells. These solar cells can be previewed at our facility in Ventura, California.
Condition:
New
This item is new and unused.
CLICK BELOW FOR MORE ITEMS
Shipping
Best Offers
Returns
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA.  Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you.  All items are shipped from our warehouse in Ventura, CA USA.
​​​​​​​
We have
IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an
OFFER
on this item and you do not see a
MAKE OFFER
button, please use the
CONTACT SELLER
link at top right under our username. ​​​​​​​
30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Satisfaction
Guaranteed
Fast Shipping
Customer Support
Click here to see description
Nanosolar Lot of 1000 NanoCells 2.6KW Lightweight Flexible CIGS MWT Solar Cells
Nanosolar NanoCell 2,600 Watt Lot of 1,000 2.6 Watt Lightweight Flexible Aluminum CIGS MWT Solar Cells
This is for a full 1,000 cell carrier. This is for a lot of 1000 solar cells that total 2,600 watts. These are rated at about 0.45 volts at 5.8 amps and are a flexible cell made on a semi rigid but flexible aluminum base.
We have found 3M double sided conductive tape is the best way to connect these cells for the do it yourself method. We are also experimenting with battery tab spot welders. Nanosolar used Ultrasonic welders to assemble these into panels.
Manufacturer Specifications:
Raw Solar Cell Uncoated
Rated Power: 2.6 Watts
Vmpp (V) 0.45
Impp (A) 5.8
Voc (V) 0.61
Isc (A) 6.7
Operating Module Temperature -40 to +85C
Length: 165mm (6.5 inches)
Width: 135mm (5.3 inches)
Height: 0.4mm (0.02 inches)
Weight: 18.5g
Raw Solar Cell Uncoated
Lightweight Aluminum Structure CIGS Solar Cells which are Semi-Flexible
MWT Metal Wrap-Through Solar Cell Technology
Product manuals, data sheets, specifications, etc.... are available in the DOWNLOADS tab above.  Contact us if you have any questions.
These raw flexible solar cells are extremely rare and have never been offered for sale to the public before. These came from the last experimental production runs at the Nanosolar Facility in California. The facility and company was liquidated during September and October of 2013. We can ship these in bin racks of 1,000 cells and cartons of 6,000 cells if you would like larger quantities.
These raw solar cells are very robust for CIGS, however, will degrade if not encapsulated in weather tight enclosure. Its interesting for experiment we have left a few exposed and un-encapsulated for 2 years and have found minimal degradation.
The CIGS solar cells are made of aluminum and to connect them we have used double sided conductive acrylic adhesive tape made by 3M / Tape Case (1182). Nanosolar used ultrasonic metal spot welders to connect the cells in production We have found a spot welder does connect them but if the settings are not just right you will blow a hole through them or the connection is weak. We believe a combination of the 3M 1182 tape and spot weld may be the best choice for DIY applications.
We have had many questions regarding cutting these cells. When these cells are cut they retain their .45 volts but the amps are reduced somewhat proportionally. You cannot use regular scissors or tin snips as these are made of 2 thin sheets of aluminum separated by energy producing compounds. If the top (negative) and bottom (positive) aluminum sheets touch it shorts the cell. We have successfully cut these cells with a water-jet cutter as well as a sharp bench shear set at 45 degree angle. It is possible to cut and then sand the cut edges back until the two sheets are separated but that is a tedious task and not recommended. Also we have noticed the cut cells are not as robust as the uncut cells even when accounting for the size differences of the cells.
The large area of metal (nickel coated aluminum) back is the positive output of the cell. The thin strip of un-coated aluminum on the down-facing side of the front is the negative output of the cell. Let me know if you have any questions about these cells. These came from the manufacturing floor of Nanosolar in San Jose and are being stored in air tight bags with desiccant. Each cell was tested for proper output by Nanosolar before being packaged and we have found these are very robust cells. These solar cells can be previewed at our facility in Ventura, California.
Condition:
New
This item is new and unused.
CLICK BELOW FOR MORE ITEMS
We have
IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an
OFFER
on this item and you do not see a
MAKE OFFER
button, please use the
CONTACT SELLER
link at top right under our username. ​​​​​​​
Shipping
Returns
Best Offers
30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA.  Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you.  All items are shipped from our warehouse in Ventura, CA USA.
​​​​​​​
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Customer Support
Satisfaction
Guaranteed
Fast Shipping
On May-25-21 at 16:30:23 PDT, seller added the following information: